Introduction
An Aussiedoodle’s “generation” label tells you exactly how much Poodle versus Australian Shepherd is in a specific dog, and that ratio is the single biggest predictor of its coat, shedding, and allergy-friendliness. An F1 Aussiedoodle is 50% Poodle and 50% Australian Shepherd; each backcross toward the Poodle (the “B”) pushes that percentage — and the odds of a low-shedding coat — higher.
Every letter and number in “F1B” or “F2B” is shorthand from genetics, and once you understand the pattern, you can decode any Aussiedoodle listing in seconds. Here’s the full breakdown, generation by generation, plus the one term almost nobody explains: the reverse F1B.
Aussiedoodle Generation Chart
| Generation | Parents | Poodle % | Aussie % | Shedding | Hybrid Vigor | Coat Predictability |
|---|---|---|---|---|---|---|
| F1 | Purebred Poodle × Purebred Australian Shepherd | 50% | 50% | Low to moderate | Highest | Least predictable |
| F1B | F1 × Purebred Poodle | 75% | 25% | Low, often near-hypoallergenic | High | More predictable, curlier |
| F1BB | F1B × Purebred Poodle | 87.5% | 12.5% | Very low | Moderate-high | Most Poodle-like coat |
| F2 | F1 × F1 | 50% | 50% | Variable, unpredictable | Moderate | Least predictable of all |
| F2B | F1B × F1 (or F1 × F1B) | ~62.5% | ~37.5% | Low to moderate | Moderate | More predictable than F2 |
| Reverse F1B | F1 × Purebred Australian Shepherd | 25% | 75% | Moderate to high | High | Aussie-leaning coat and build |
| Multigen | F2 or later × F2 or later | Varies (Poodle-leaning) | Varies | Typically low | Lower (more inbreeding risk) | High, once a line is established |
What Do the Letters and Numbers Actually Mean?
The “F” stands for “filial” — it just means generation. The number after it (F1, F2, F3) counts how many generations removed the dog is from a first-cross Poodle/Aussie pairing.
The “B” means backcross: a dog from one generation was bred back into a purebred line to push the genetics further in one direction, almost always toward the Poodle, to lock in a lower-shedding coat.
F1 Aussiedoodle: The First Generation
An F1 Aussiedoodle is the direct offspring of a purebred Poodle and a purebred Australian Shepherd — nothing more complex than that. It’s a 50/50 split, which gives F1 puppies the strongest hybrid vigor of any generation, since they’re the least genetically related cross possible in this line.
F1 Aussiedoodle Full Grown
Full-grown size depends entirely on which Poodle size was used in the cross. A standard-Poodle F1 typically lands in the 20–30kg, roughly 40cm-tall range and takes about 16 months to finish growing. A mini-Poodle F1 usually settles between 7–20kg and reaches full size closer to 12–13 months.
Coat and structure both keep shifting subtly through the first year, so “full grown” for an F1 really means somewhere between 12 and 18 months, size-dependent.
F1 Aussiedoodle Shedding
F1s sit in the middle of the shedding spectrum. Because they’re only half Poodle, some F1 puppies inherit a wavier, moderate-shedding coat closer to the Australian Shepherd side, while others land closer to the Poodle’s low-shed curl — and there’s genuinely no way to guarantee which one a given puppy will have until the adult coat comes in around 8–12 months.
This unpredictability is exactly why breeders developed the F1B.
F1B Aussiedoodle: The Backcross Generation
An Aussiedoodle F1B is what you get when an F1 is bred back to a purebred Poodle, producing a puppy that’s roughly 75% Poodle and 25% Australian Shepherd. That extra dose of Poodle genetics is what pushes the coat toward tighter curls and meaningfully lower shedding, which is why F1B is the generation most often recommended to families managing mild-to-moderate allergies.
F1BB Aussiedoodle: Maximum Poodle Influence
An F1BB comes from breeding an F1B back to another purebred Poodle, landing around 87.5% Poodle and 12.5% Australian Shepherd. This generation carries the highest odds of a tight, low-shedding coat of any first-cross line, but it also means the least Australian Shepherd temperament and working drive comes through — worth weighing if the herding-dog energy and intelligence were part of the appeal in the first place.
What Is a Reverse F1B Aussiedoodle?
A reverse F1B Aussiedoodle is the mirror image of a standard F1B: instead of backcrossing an F1 toward the Poodle, the breeder crosses it back to a purebred Australian Shepherd, producing a puppy that’s roughly 75% Australian Shepherd and 25% Poodle.
It’s an uncommon, intentional choice — usually made by breeders who want to preserve more of the Australian Shepherd’s classic coat, coloring, and working temperament while still keeping some of the Poodle’s coat texture and reduced shedding compared to a purebred Aussie.
Because these puppies lean Aussie-dominant, they typically shed more than a standard F1B and are a poor fit for anyone shopping specifically for allergy-friendliness.
F2 Aussiedoodle: What It Actually Means
What does F2 Aussiedoodle mean?
It’s the offspring of two F1 Aussiedoodle parents — genetically still a 50/50 Poodle-to-Australian-Shepherd split, but because both parents were themselves a mixed generation, the traits each puppy inherits are far less predictable than an F1.
In a single F2 litter, you can see everything from tight curls to nearly straight, moderate-shedding coats, which is why F2 Aussiedoodles are less commonly bred on purpose than F1 or F1B.
F2B and Multigen Aussiedoodles
An F2B comes from pairing an F1B with an F1 (or occasionally two F1Bs), landing around 62.5% Poodle and 37.5% Australian Shepherd — a middle ground that’s more coat-predictable than a straight F2 without going as Poodle-heavy as an F1BB.
Once a line goes beyond F2B — F3 and later, bred generation to generation — it’s usually just called Multigen. By this point, if a breeder has been selecting consistently for a low-shedding, curly coat over several generations, the outcomes become far more predictable, but the tradeoff is reduced genetic diversity and a smaller pool of hybrid vigor compared to an F1.
Mini and Miniature Aussiedoodle Generations Explained
The generation letters (F1, F1B, F2, and so on) describe the Poodle-to-Australian-Shepherd ratio — they don’t describe size on their own. Size comes from which size of Poodle was used in the original cross. A mini Aussiedoodle generation label (F1 Mini, F1B Mini, and so on) simply means a Miniature Poodle was used somewhere in that dog’s lineage instead of a Standard Poodle, which is what caps the adult size in the roughly 7–20kg range regardless of whether the dog is F1, F1B, or F2.
The same logic applies to miniature Aussiedoodle generations — “miniature” and “mini” are typically used interchangeably by breeders, and neither changes the shedding or hybrid-vigor math described above; only the Poodle parent’s size does.
Which Aussiedoodle Generation Is Right for You?
- Want the strongest hybrid vigor and don’t mind moderate shedding: F1.
- Have mild-to-moderate allergies and want a curlier, lower-shed coat: F1B.
- Have more severe allergies: F1BB, or a well-established Multigen line from a breeder who health-tests for genetic diversity.
- Want more Australian Shepherd coloring, coat, and working temperament, and can manage more shedding: Reverse F1B.
- Want the most predictable outcome overall, generation aside: ask the breeder for photos and coat details of the specific parents, since predictability comes from the parents’ individual genetics as much as the generation label.
At What Age Does an Aussiedoodle Calm Down?
Most Aussiedoodles start noticeably settling between 18 months and 2 years old, once both the Poodle and Australian Shepherd sides finish their adolescent energy phase. Smaller, mini-sized Aussiedoodles often mature — and calm down — slightly earlier than standard-sized ones, sometimes by 15–18 months, simply because they reach physical maturity sooner.
Even as adults, though, Aussiedoodles from any generation keep the intelligence and drive of both parent breeds, so “calm” for this breed still means needing daily mental and physical exercise — it’s a shift in intensity, not a switch to a low-energy dog.
FAQs
What are the different types of Aussiedoodles?
Aussiedoodle “types” break down two ways: by size (toy, mini/miniature, and standard, based on the Poodle parent’s size) and by generation (F1, F1B, F1BB, F2, F2B, reverse F1B, and Multigen, based on how much Poodle versus Australian Shepherd genetics a dog carries).
A single Aussiedoodle is always both a size and a generation — for example, a “Mini F1B Aussiedoodle” describes a small dog that’s roughly 75% Poodle.
At what age does an Aussiedoodle calm down?
Most Aussiedoodles settle noticeably between 18 months and 2 years old, with mini-sized dogs sometimes calming slightly earlier due to reaching physical maturity sooner. They stay an intelligent, active breed for life regardless of generation, so ongoing daily exercise and mental stimulation stay important well past that age.
What does F2 Aussiedoodle mean?
An F2 Aussiedoodle is the offspring of two F1 Aussiedoodle parents, keeping the same 50% Poodle, 50% Australian Shepherd genetic split as an F1 — but because both parents are themselves a mixed generation rather than purebreds, the coat and temperament outcomes in an F2 litter are considerably less predictable than an F1 litter.
What is the difference between F1 and F1B Aussiedoodles?
The core difference is Poodle percentage: an F1 Aussiedoodle is 50% Poodle and 50% Australian Shepherd, while an F1B is roughly 75% Poodle and 25% Australian Shepherd because it comes from breeding an F1 back to a purebred Poodle.
That extra Poodle genetics gives F1B puppies a curlier, lower-shedding coat on average, which is why F1B is more often recommended for people managing allergies, while F1 tends to have slightly stronger hybrid vigor and a more even blend of both parent breeds’ temperaments.
Is F1 still the best Aussiedoodle generation to choose in 2026?
There isn’t a single “best” generation — it depends on your priorities. F1 still offers the strongest hybrid vigor and most balanced temperament, which is why many health-focused breeders continue to favor it, while F1B and later Poodle-heavy generations remain the better choice specifically for allergy management.
The generation ladder itself hasn’t changed; what’s shifted in recent years is that Multigen lines have become more common as more breeders have had several generations of established, DNA-tested lines to work from.
What is a reverse F1B Aussiedoodle?
A reverse F1B is an F1 Aussiedoodle bred back to a purebred Australian Shepherd instead of a Poodle, producing a puppy that’s roughly 75% Australian Shepherd and 25% Poodle. It’s a deliberate but uncommon choice for breeders prioritizing Australian Shepherd coloring, coat, and working temperament over the low-shedding traits most buyers look for.
Conclusion
Understanding Aussiedoodle generations helps you choose a dog that matches your lifestyle. While labels like F1, F1B, and Multigen indicate expected coat type, shedding, and genetics, no generation is universally better. The best choice depends on your preferences, the puppy’s parents, and the breeder’s health-testing practices.